FEATURES

• Design that yields a 300 to 1500 lb. weight capacity.
• Interior designed for easy 19" EIA 310-D compliant rail installation and adjustment.
• New stronger 12 gauge, powder coated
"Universal Cage Nut Rail" standard.
Cage nut options are M6 or 10/32. If
you require tapped 10/32 rails, these
will still be available - please specify at
time of order.
• Rails also double as cable management
with round cable pass through holes and
vertical and horizontal tie down slots.
• Rails will have RMU markings and
standard universal rail will be multivendor
server compliant.
• TRC (Tru Rail Count) rails - this certifies
that the number of RMU are true and all
accessible within the door opening.

• Vertical & horizontal cable management
lacing bars that move independently from
the mounting rails. Improved design
removes any size restrictions caused by
cable trays.  Click here for brief animation
of the lacing bar and the new bottom panel.
• Networking/ganging of enclosures through
the corner post, no tools required. This
allows you to keep side panels installed
when required.

BP-ES24B – rear bottom panel (24”W enclosures)
BP-ES29B – rear bottom panel (29”W enclosures)

VLB-7232 – vertical lacing bar kit (72”H x 32”D enclosures)*
VLB-7236 – vertical lacing bar kit (72”H x 36”D enclosures)*
VLB-8432 – vertical lacing bar kit (84”H x 32”D enclosures)*
VLB-8436 – vertical lacing bar kit (84”H x 36”D enclosures)*
NOTE: All lacing bar kits include 1 vertical lacing bar, 2 horizontal lacing bars and 6 CM-01
cinch straps

HLB-32 – horizontal lacing bar (32”D enclosures)
HLB-36 – horizontal lacing bar (36”D enclosures)
VLB-72 – vertical lacing bar (72”H enclosures)*
VLB-84 – vertical lacing bar (84”H enclosures)
NOTE: All vertical lacing bars include 6 CM-01 cinch straps
*Additional lacing bars to be used with lacing bar kits.

7205-ES1P – Pair of 19” EIA mounting rails, tapped 10/32 w/hardware (72”H enclosures)
7205-ES2P – Pair of 19” EIA mounting rails to accept M6 cage nuts w/hardware (72”H encl.)
8405-ES1P – Pair of 19” EIA mounting rails, tapped 10/32 w/hardware (84”H enclosures)
8405-ES2P – Pair of 19” EIA mounting rails to accept M6 cage nuts w/hardware (84”H encl.)
 

AT2 – anti-tip legs

G101 – networking/ganging kit

AK101 – seismic anchoring kit

7208-E – casters, set of 4 (2 locking, 2 non-locking)#
7208-EALL – casters, set of 4 (all 4 locking)#
# These caster sets for e-series with black powder coat rails only

E23K-32 – conversion kit to convert 19” to 23” (29”W x 32”D enclosures)
E23K-36 – conversion kit to convert 19” to 23” (29”W x 36”D enclosures)

Note: Don't forget to look at our new product
section for accessories for cooling & handle
options, among others.

Using the E-Series along with our accessories installation, maintenance and service has now become even easier.

Call Great Lakes Case & Cabinet Co., Inc. or
their distributors for additional information.