• UL & c-UL Listed 60950
• Compatible with Shaded Pole and Split Capacitor Fans
• Recessed 1U horizontal mounting with attached brackets
• Chassis dimensions 1.72"x17.1"x3.52" (HxWxD)

   

   

   

   

Local Input

• 125 or 250V
• No Circuit Breaker
• Dual A/C input - 2 C-14 IEC -auto-switching in event of power failure
  • 90-264 Volt auto sensing
• RJ-45 ethernet connection
  • Access via web browser
  • Direct connection available via crossover cable
• Four RJ jacks for connection of up to 4 remote temperature sensors
• Fan speed manual/local override via rotary switch - unplug ethernet connection
  • Set point change button must be pressed while activating rotary switch
  • Rotary switch with recessed screwdriver slot
  • Manual temperature set-points of 65-100 degrees F
  • Manual full on setting for 100% fan speed
• Plug and Play, no client software required

Remote Input - Three Levels of Password Protection

• Temperature set-points of 65-100 degrees F
• Optional full on setting for 100% fan speed
• Friendly device and sensor names
• Farenheit or celsius selection
• Low and high trip level selection
• Alarm notification selection
  • SNMP trap, e-mail and/or audible buzzer

 

 

 

Local Output

• Three C-13 IEC outlets for AC fan connection, 267 watts per outlet
• Fan speed control of 30-100%
• Fans start on full speed for 1 second and then adjust to the necessary speed to maintain set point temperature
• Scrolling digital display of real-time measurements
  • Set point temperature
  • Internal temperature
  • Four external temperature
  • Fan speed percentage
• Audible alarm with silence reset button
• Fan running visual indicator LED's
  • Speed - running at a Level less than full Full On - orange LED
  • Fan manually off - orange LED
  • Remote control - orange LED
  • Fan Full on - orange LED
  • Over temp - red LED

Remote Output

• Real-time measurements and graph
  • Set point temperature
  • Internal temperature
  • Four external temperatures
  • Fan Speed
• Log data available for export via XML or real-time via SNMP
• Event log with variable content settings
• Visual image display from optional IP addressable camera
• Alarms via SNMP trap, e-mail and/or audible buzzer